5000CS Quattro Wagon L5-2226cc 2.22L SOHC Turbo (MC) (1988)
/Page-1263001.png)
Wastegate Solenoid: Testing and Inspection
WORK SEQUENCE
-
Remove connector from multi-thermo switch
-
Switch ON ignition
-
Quickly brush ground with terminal as shown
-
Clicking of the two-way valve must be heard
If NOT heard:
-
Pull off terminal from wastegate solenoid (arrow)
-
Connect multimeter US 1119 between terminal 1 (green/purple wire) and ground
-
Specification: approx. 12 volts
-
Connect multimeter US 1119 between terminal 2 (blue/black wire) and terminal 19 of control unit (see below)
