5000CS Turbo L5-2226cc 2.22L SOHC Turbo (MC) (1987)
CAUTION
Do not use solvent which could damage rubber hoses or seals when cleaning hydraulic system components.
Use only clean solvent.
Note
It the strainer cannot be thoroughly cleaned or is damaged, replace it with a new part. Use the newer version strainer, Part No. 443 422 385A.
-
install reservoir assembly in vehicle and attach hoses and lines disconnected during removal
Hydraulic pump, priming
Note
On new or replacement pumps, read procedure described on pink tag supplied in the box.
CAUTION
Part Numbers may be different for different models, model years and options. Always consult with the Parts Dept. for correct application
-
assemble pump brackets and pulley to new pump
CAUTION
Use only hydraulic fluid, Part No. G 002 000.
-
pour some hydraulic fluid into outlet port (arrow A) and rear chamber (arrow C) of new pump
-
fill suction chamber (arrow B) with hydraulic fluid
-
rotate pump slowly by hand through four to five complete revolutions (fluid will be discharged at arrow C). Keep suction chamber (arrow B) full
of fluid