5000CS Turbo L5-2226cc 2.22L SOHC Turbo (MC) (1987)
Window Track: All Technical Service Bulletins
Window Slot Molding - Wavy, Malformed, Loose
Number:
Group:
88-01
64
January 15, 1988
Body Exterior
Applies To:
All 5000 Models 1985-1987
Subject:
Window Slot Molding - Wavy, Malformed, Loose
Cause:
Insufficient material strength.
Production Change:
Stainless steel molding
As of:
May 1987 VIN: 44_HN113006
Service Solution:
Prior to VIN 44_HN113006:
Install kit, P/N 443 898 531. Kit consists of front left/right and rear left/right window slot moldings (including plastic guides). Replace all four moldings
(including plastic guides) due to slight visual difference between old and new moldings. Report all problems on new moldings under P.I. 6448 and 6468.
After VIN 44_HN 113006:
Replace individual moldings in case of damage or accident.
New P/N: Front 443 853 283G, 443 853 284G Rear 443 853 763G, 443 853 764G
Order plastic guide, P/N 443 853 397, with each molding. Cut guide for rear door to appropriate length.