audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Warm Up Regulator|Description and Operation|Page 1463 > < All Technical Service Bulletins for Wastegate:|218301A|Page 1459
Page 1
background image

Warm Up Regulator: Description and Operation

Fig. 15 Control Pressure Regulator Enrichment System

    The temperature switch opens at 58°C (136°F) during rise in temperature and closes at 48°C (118°F) during falling temperature. When the
temperature switch is closed, diaphragm chambers I and II are connected by a one-way orifice. During acceleration, vacuum in chamber II is higher than
that in chamber I. This causes the diaphragm and upper spring base to be pulled down. This action provides enrichment due to pressure differential. The
enrichment time is determined by the size of the orifice.

1.

With the engine warm, vent chamber I to atmosphere.

2.

Using vacuum pump, apply 15 inches Hg to chamber II.

3.

Control pressure should drop to 1.5 - 1.8 bar (22 - 26 psi).

Warm Up Regulator|Description and Operation|Page 1463 > < All Technical Service Bulletins for Wastegate:|218301A|Page 1459