5000S Sedan L5-2226cc 2.22L SOHC (KZ) (1985)
TO CENTER THE SENSOR PLATE
-
Remove the 10 mm adjusting bolt from the center of the plate
-
Coat the bolt with loctite
-
Re-install the bolt (finger-tight)
-
With centering tool US 1109 or a .10 mm (0.004") feeler gauge, carefully center the plate
-
Torque the adjusting bolt to 5 - 7 Nm (4 ft/lbs.)
-
If plate cannot be centered and lever appears to be off center in air cone, remove air sensor housing
TO CENTER THE SENSOR LEVER
-
Remove clamping bolt on sensor lever counter-weight
-
Coat the bolt with loctite
-
Re-install the bolt (finger-fight)
-
Slide lever to center position
-
Tighten clamping bolt