5000S Turbo L5-2144cc 2.14L SOHC Turbo (KH) (1984)
-
switch ignition OFF
-
press and hold reset button
-
switch ignition ON
^
computer display 2000-2007
Note
When adjusting code, the computer control unit is also checked. The computer control display shows 200 when correct.
Note
The number on the extreme right specifies the selected code.
Adjust Code Switch
-
adjust code switch according to vehicle type
Code Switch
0 - Audi 5000S Turbo USA (display in miles and U.S. gallons) 6 - Audi 5000S Turbo Canada 7 - Audi 5000S Turbo Canada (display in liters and kilometers)
Range reading on computer control unit, adjusting
Note
Calibrate the range reading only after peforming the following:
^
replacing fuel gauge sensor
^
replacing computer control unit (if range reading display is defective)
Note
Calibrate range reading only with the fuel tank full.
When calibrating the range reading the computer control unit specifies an average fuel consumption of 110 liters/100 km or 23.5 MPG.
Work sequence
-
switch ignition OFF
-
press and hold reset button
-
switch ignition ON
^
computer display 2000-2007
-
check coding
Note
The number on the extreme right specifies the code of the computer control unit.
-
release reset button
^
specified value: in km approx. 800 in mi approx. 500