5000S Turbo L5-2144cc 2.14L SOHC Turbo (KH) (1984)
Adjusting Tool
Test In full throttle position
-
pull up slide (2) of adjusting tool to second stop (full throttle position)
^
specified value: 4.0-4.5 V
If specified value is not attained, - repeat test in idle position and/or repeat basic adjustment of special tool
If specified value is attained
-
push slide (2) all the way down
^
specified value: 0.0 V
If specified value is not attained, - repeat test in idle and full throttle positions
Note
If specified values are not attained after repeated testing and adjustments, - replace air flow sensor assembly
If specified values are attained, - seal mounting screws with paint