5000S Turbo L5-2144cc 2.14L SOHC Turbo (KH) (1984)
^
press seal in (lettering pointing outward) until seated
^
coat seal between sealing lips with multi-purpose grease
^
lightly oil pump shaft and bushing with hydraulic oil, Part No. G 002 000
^
slide bushing onto pump shaft
^
align washer in pump housing to shaft bore
^
insert pump shaft/bushing into housing while pushing pistons back to allow shaft and bushing to slide into housing at same time
^
press triangular flange on pump shaft (shoulder of flange toward tool) until flush with end of shaft