5000S Turbo L5-2144cc 2.14L SOHC Turbo (KH) (1984)
/Page-755004.png)
^
remove commutator brush plate A in direction of arrow
^
remove rear bearing
^ use locally available small bearing puller
^ penetrating oil may be required install new bearing (arrow) Part No. 443 903 221
CAUTION
DO NOT damage brushes when reinstalling armature/commutator to brush plate.
^
reinstall armature/commutator to brush plate and rear bearing cover
^
reinstall insulators and terminal retaining nuts
^
damaged tabs may be repaired by making a small cut in the remainder of the tab and opening it with a chisel (as shown)
^
reinstall rear bearing cover
