5000S Turbo L5-2144cc 2.14L SOHC Turbo (KH) (1984)
Seat Belt Height Adjustment
Note
Vehicles built after 5/83 already have the additional holes in the B-pillar.
-
drill 18.5 mm hole at marked location
-
deburr edge of hole and paint exposed bare metal surface
-
place fitting holder on removed B-pillar trim, align and mark hole B or C
-
make 19.4 mm hole in B-pillar trim at marked location
Seat Belt Height Adjustment
-
remove fitting 4 and washer 5 from holder 3 and insert holder into B-pillar through hole
-
coat threads of adapter 4 with locking compound, Part No. D 000 600
Note
Adapter may already have a reddish coating on the threads. If so, it is not necessary to apply additional locking compound.