5000S Turbo L5-2144cc 2.14L SOHC Turbo (KH) (1984)
Throttle Full Close Switch: Testing and Inspection
Idle and full throttle switches, checking
Work sequence
-
Unplug connector for idle and full throttle switches at throttle body
Voltage supply, checking
-
Connect voltmeter between terminal 2 of connector C and ground
-
Switch ON ignition
^
Specification: approx 12 V
-
Switch OFF ignition
If NOT OK
-
Check for open circuit in wiring and repair as necessary, see
current flow diagram
Idle switch, checking
-
Connect ohmmeter between terminals 1 and 2
^
Specification: approx. 0 ohm
-
Actuate switch with throttle lever
^
Specification: infinite ohm