5000S Turbo L5-2144cc 2.14L SOHC Turbo (KH) (1984)
A - silver tag pumps
B - red tag pumps (with any code number)
^
use Part No. N 902 669 01 (identified with 2 grooves on bolt head)
-
tighten suction line banjo bolt to 40 N-m (29 ft.lb.)
-
fill reservoir with hydraulic fluid, Part No. G 002 000
Pump operation, checking
CAUTION
Do not turn the front wheels unless the hydraulic system is filled with fluid. Damage to the steering rack could result if wheels are turned after the
hydraulic system has been emptied.
-
start engine while holding brake pedal down firmly
Note
The brake pedal will be drawn down by hydraulic pressure when the brake portion of the pump begins to operate.
-
if brake pedal does not go down in 30 seconds, stop engine and let vehicle sit for 30-45 seconds
-
repeat pump operation checking procedure
-
inspect all hoses and fittings for leaks
-
bleed steering system by turning steering wheel lock to lock several times quickly
-
add more hydraulic fluid if level drops below "MAX" marking
Note
Reservoir must be free of air bubbles when steering wheel is turned.
Labor operation 48 98 210
Repair:
130
Quality check:
10
Total:
140