5000S Turbo L5-2144cc 2.14L SOHC Turbo (KH) (1984)
FIGURE 3 - ELECTRICAL CONNECTIONS
-
route R/BK wire through console and over drivers footwell to brake light switch; splice (14) to either R/ BK wire on switch.
CAUTION
Do not confuse the vacuum vent valve with the brake light switch. The wiring colors are different and the brake light switch does NOT have a
vacuum connection.
-
remove BK/BL wire and terminal from cavity 15 of neutral safety switch connector, insert into single wire connector of kit harness
-
connect BK/BL wires (terminal A) to cavity 15
-
connect both BK/BL connector halves together
-
remove BR/BL wire and terminal from cavity 50A of neutral safety switch connector insert into single wire connector of kit harness
-
connect BR/BK wire (terminal C) to cavity 50A
-
connect both BR/BL connector halves together
-
connect lockout solenoid (5) connectors (E), (F) (either terminal OK)
-
position wires using three foam strips