5000S Wagon L5-2309cc 2.3L SOHC (NF) (1988)
DO NOT install O-ring seals in place of metal seals or vice versa.
CAUTION
DO NOT twist high pressure hose when tightening connection.
^
connect damper pipe to central hydraulic pump with new banjo bolt and new seals. Hand tighten only
^
fasten damper pipe to pump with mounting bolts at retaining bracket
^
tighten banjo bolt
^
tighten union while holding 10 mm hexagonal with a wrench
^
clean hydraulic fluid off all parts
Checking
^
check hydraulic fluid level in reservoir; top up with hydraulic fluid G 002 000 if necessary
^
swivel central hydraulic pump towards upper stop on tensioner. Replace V-belt if pump contacts upper stop with belt installed
^
run engine at idle and check for leaks at all connections
^
install injector fan motor