80 L5-2309cc 2.3L SOHC (NG) (1991)
/Page-1207002.png)
100
^
remove front rubber mount from base (arrow)
^
trim rubber mount (as shown) in increments of at least 1.0 mm (3/64 in.) with utility knife until vibration is reduced
^
DO NOT trim more than 5.0 mm (13/64 in.) in total
^
reinstall rubber mount (arrow B) with trimmed side upward (arrow A)
^
recheck for vibration with engine at operating temperature and automatic transmission engaged in drive
