audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Headlamp|Locations > < Hazard Warning Flasher|Locations
Page 1
background image

Headlamp: Technical Service Bulletins
Lighting - Headlamp Aiming Information

94 08 40 

2005624/4 

November 14, 2008. 

Supersedes Technical Service Bulletin Group 94 number 07-02 dated February 26, 2007 for reasons listed below.

Affected Vehicles

94 Headlights, aiming using Hella Universal Beamsetter IV

Condition

Headlights not aimed correctly.

Technical Background

Not applicable.

Production Solution

Not applicable.

Service

Aim headlights using instructions in Repair Manual (see Maintenance >> Headlights, checking and adjusting) for all models except for 90, 100, S4, A6,
S6 (1997) and Cabriolet, see Electrical Equipment, Repair group 94 >> Lights, Switches - Exterior).

-

Correction to VOL setting for Low Beam = 1.0%.

-

Ensure vehicle is properly loaded as outlined in procedure.

-

In cases where customer states that headlights appear to be aimed too low with correct 1.0% inclination, it is allowable to adjust to 0.7%
inclination.

Warranty

This TSB is informational only and not applicable to any Audi warranty.

All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service
manuals for the latest information.

Headlamp|Locations > < Hazard Warning Flasher|Locations