80 L5-2309cc 2.3L SOHC (NG) (1991)
Fig. 3 Steering Rack Seal, Removing
Use internal puller US 1088 (Kukko 21/3)
Install puller in sealing lip
Note: After pulling out the rack seal, repair any damage to the steering gear housing caused when removing the toothed washer.
Steering rack seal, installing
Note: Before installing, moisten all parts of mounting sleeve and steering rack seal with hydraulic oil. Every new repair kit is supplied with a
mounting sleeve.
The mounting sleeve consists of the parts a , b and c.
Insert part b of mounting sleeve into part a (put parts on a flat surface)
Slide steering rack seal d onto mounting sleeve. (The metal side faces towards the collar of the mounting sleeve a)