audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Up to VIN 89 JA 413 627|Page 6679 > < Up to VIN 89 JA 413 627|Page 6677
Page 1
background image

Steering Gear: Service and Repair
From VIN 8A MA 054 850

Note:  All components marked with an asterisk (*) are included in the repair kit and must be replaced when repairing.

CAUTION:  The power steering system uses only hydraulic oil, Part No. G 002 000.

Always keep the work area and all components absolutely clean.

1 - Steering gear housing

2 - Steering rack seal*

removing Fig. 3

3 - Lock ring

can only be removed/installed with steering gear removed

4 - Retaining ring

push up to stop on gear rack
install boot in groove

5 - Boot

can be replaced with steering gear installed

6 - Clamp

use screw-type hose clamp when installing (screw facing toward body panel)

7 - O-ring*

always replace

8 -  Adjusting screw

adjusting steering play Fig. 7

9 - 20 Nm (15 ft lb)
10 - Cover

11 - O-ring*

35 X 2 mm
always replace

Up to VIN 89 JA 413 627|Page 6679 > < Up to VIN 89 JA 413 627|Page 6677