audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Throttle Full Close Switch > < Models Produced Up to March 1990|Page 4458
Page 2
background image

4.

Start engine, making sure all electrical loads are turned OFF. Radiator cooling fan must not be running during this test!

 

5.

Rev engine from idle to about 4,000 rpm and note voltage. 

^

Voltage should vary between approx. 1.5 and 3.4 volts as engine rpm varies. If not, replace air mass sensor.

Throttle Full Close Switch > < Models Produced Up to March 1990|Page 4458