90CS Quattro V6-2.8L (AAH) (1994)
Brake Caliper: Customer Interest
Rear Brake Caliper Assembly
REAR BRAKE CALIPER, ASSEMBLY
CAUTION!
use all parts supplied in repair kit.
1 - 35 Nm (26 ft lb)
^
always replace
^
hold guide pin when loosening/tightening
2 - Brake caliper housing
^
replace housing if leaking at parking brake lever
3 - Piston seal
^
removing, -> Fig. 3
4 - Piston
^
removing, -> Fig. 1
^
installing, -> Fig. 5
^
diameter: 38 mm
5 - Protective seal
^
installing, -> Fig. 2 and Fig. 4
6 - Brake pad carrier
7 - Bleeder screw
8 - Dust cap