90CS Quattro V6-2.8L (AAH) (1994)
Vibration Damper: Service and Repair
Virbration damper, removing and installing
Removing
Remove ribbed belt, refer to Ribbed Belt/Service and Repair See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt
NOTE:
The center bolt does not have loosened to remove the vibration damper.
Remove 8 mounting bolts
Remove vibration damper.
Installing
When installing, make sure that notch (arrow) in vibration damper is aligned with tab on toothed belt sprocket.
Tightening torque: 25 Nm (18 ft lbs).