audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

All Other Service Bulletins for Crankshaft Main Bearing Seal:|879301|Page 1403 > < All Other Service Bulletins for Crankshaft Main Bearing Seal:|879301
Page 2
background image

-

With your hand, reach into evaporator housing through opening -A-.

-

Remove gasket -8- (if necessary use a stiff wire bent to the shape of a hook).

Note

The gasket is a light gray foam material approximately 8 1/2 inches long and 3/4 inch square.

-

Install in reverse order of removal without gasket -B-.

-

Check for proper connections between air distribution housing and side vents.

-

Check for proper operation of heater/air conditioner.

All Other Service Bulletins for Crankshaft Main Bearing Seal:|879301|Page 1403 > < All Other Service Bulletins for Crankshaft Main Bearing Seal:|879301