90CS Quattro V6-2.8L (AAH) (1994)
Fuse Block: Service and Repair
Service Flow
Main Fuse/Relay Panel
CAUTION!
Before working on the electrical system:
-
Determine the correct coding for the anti-theft radio.
-
Disconnect the battery Ground (GND) strap.
1 - Cover
2 - Fuse removal tool
- Attached to cover
3 - Relays See: Fuse/Relay Panel, Relay and Fuse Identification
4 - Spare fuses
5 - Fuses
- Removing See Fig. 1 below
- Identifying and/or applicable wiring diagrams See: Fuse/Relay Panel, Relay and Fuse Identification
6 - Fuse/relay panel
- Identifying connections and terminals, and/or applicable wiring diagrams See: Auxiliary Fuse Holders, Removing and Installing
7 - Auxiliary fuses
- Identifying and/or applicable wiring diagrams See: Fuse/Relay Panel, Relay and Fuse Identification
8 - Auxiliary fuse holder
- Removing and installing See: Auxiliary Fuse Holders, Removing and Installing
- Identifying and/or applicable wiring diagrams See: Fuse/Relay Panel, Relay and Fuse Identification
9 - Fuse and relay panel housing
10 - Wiring harness connectors
- Removing See Fig. 2
- Identifying connections and terminals and/or applicable wiring diagrams See: Fuse/Relay Panel Wiring Connections
11 - Data Link Connectors (DLC)
- For On Board Diagnostic (OBD)
DLC locations
- m.y. 1994/1995: in plenum, left (as shown)
- m.y. 1996: below rear ashtray insert
- m.y. 1997: lower left corner of instrument panel, to left of steering wheel
12 - Nuts, M5
- For OBD wire distributors K and L