90CS Quattro V6-2.8L (AFC) (1995)
^ Removal not necessary to remove door trim panel
^ To remove, turn 180° and pull off
^ Installed position => Fig. 3
15 - Height adjustment clip
^ With height adjusting screw
^ Adjusting height of door trim panel => Fig. 4
Fig. 1 - Number and location of tabs
Fig. 2 - Disconnecting cable
1 - Seal
2 - Clip
Fig. 3 - Installed position of lock knob
^ After assembly, locating notches must point toward door glass
^ Knob shown in locked position
^ Distance -a- = 14 mm (9/16 in.)
Fig. 4 - Adjusting door trim panel height