90CS Quattro V6-2.8L (AFC) (1995)
Removing:
Tilt sunroof panel and press tilt flap -1- downward.
Unhook both tension springs -2- out from tilt flap.
Note: A self-manufactured hook is suitable for this procedure. Length -a- = 300 mm (12 in.).
Reach into tilt flap recess and unclip trim -3- by pushing back from front guide.
Do not lift up tilt flap too far, otherwise it will hit water drain plate
Close sunroof panel.
Remove securing bolts and nuts.
Installing: