audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABS - OBD Procedure for Use With VAG 1551 Scan Tool|Page 3404 > < ABS - OBD Procedure for Use With VAG 1551 Scan Tool|Page 3402
Page 3
background image

^

Same tire sizes (as specified) on all four wheels; tires inflated to specified pressures.

^

Conventional brake system functioning properly, including Brake Light Switch, Left and Right Brake Lights.

^

No leaks from hydraulic connections or lines (visual check of hydraulic unit, brake cylinder).

^

Wheel bearing and wheel bearing play OK.

^

Ground connection for ABS Return Flow Pump V39 on hydraulic unit OK

^

ABS Return Flow Pump Relay - J105 and ABS Solenoid Valve Relay - J106 correctly connected.

^

Harness connector on ABS Control Module - J104 correctly connected (positive engagement).

^

When working with the Scan Tool VAG 1551, the test box VAG 1598 must not be connected to the ABS Control Module - J104.

^

Function of manually engaged differential lock OK (Rear Differential Lock Indicator Light - K46 lights up when engaged and goes out completely
when switched off).

^

Differential lock not engaged.

^

All fuses OK - per wiring diagram

^

Supply voltage OK (at least 10.5 V)

Required technical information

^

Appropriate wiring diagram

^

Technical Bulletin, Group 45, No. 94-01, "ABS, checking function with VAG 1710"

ABS - OBD Procedure for Use With VAG 1551 Scan Tool|Page 3404 > < ABS - OBD Procedure for Use With VAG 1551 Scan Tool|Page 3402