90CS Quattro V6-2.8L (AFC) (1995)
-
Remove two nuts -A- from bulkhead.
-
Disconnect vacuum hose from two-way valve.
-
Disconnect evaporator water drain hose.
NOTE: When installing heater box and evaporator housing assembly, make sure grommet -B- is installed correctly and seals properly against
bulkhead and heater core tubes.
-
Remove control module -A- in direction of arrow.
-
Remove heater box and evaporator housing assembly.
NOTE: Before installing heater box and evaporator housing assembly on vehicles equipped with manual A/C, check for ease of movement of
bowden cables. Replace any damaged or binding cables.
-
Install heater box and evaporator housing assembly in reverse order of removal.