90CS Quattro V6-2.8L (AFC) (1995)
Steering Wheel: Service and Repair
REPLACE
NOTE: On air bag equipped vehicles, refer to Air Bags (Supplemental Restraint Systems), Service Precautions. Also refer to Air Bag(s) Arming
and Disarming.
Fig.9 Air Bag Unit Torx Head Screws Location
Fig.10 Air Bag Electrical Connector Disconnecting
1. Vehicles with audio coded antitheft system refer to Radio/Stereo, Service Precautions.
2. Disconnect battery ground cable.
3. Ensure wheels are in a straight ahead position, then remove air bag unit (horn pad) Torx head bolts from left and right side of steering wheel, Fig.9
.
4. Tilt air bag unit backward carefully, then lift up safety clamp and disconnect electrical connector from air bag unit, Fig.10.
5. Store air bag unit face up (Audi rings pointing up) in a safe place. Do not expose air bag unit to excessive heat (above 212°F) or place near
anything that may puncture it.