90S Quattro (Canada) V6-2.8L (AAH) (1993)
Sunroof / Moonroof Lift Mechanism: Service and Repair
Replacing Tilt Mechanism or Guide Plates
Tilt Mechanism and/or Guide Plates, Replacing
Note: The tilt mechanism can only be removed along with the guide plate.
- Tilt roof panel upward unclip trim and push back.
- Pull off circlips and release connecting lever for water drain plate.
- Unscrew guide plates from roof panel.
- Push roof panel up slightly at rear and detach guide plate together with tilt mechanism.
Installing:
- Fit washer and locking clip back to back (spring effect).
- Open end of locking clip faces toward front
- Note rubber ring for "rear guide" stud
- Phillips-head screws tightening torque: 4.5 Nm (40 in. lb.)
- Check front height adjustment.
- Adjust roof panel at rear.