90S Quattro (Canada) V6-2.8L (AAH) (1993)
Oil Pump: Service and Repair
Oil pump, removing
Ribbed belt removed, refer to Drive Belt - Service and Repair - Procedures See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service
and Repair
Camshaft drive belt removed, refer to Timing Components - Timing Belt - Service and Repair - Procedures See: Timing Components/Toothed
Belt/Service and Repair
Vibration damper removed
-
Disconnect battery
Caution!
Before disconnecting the battery, determine the correct coding for the anti-theft radio.
-
Drain engine oil
-
Remove engine undertray
-
Remove oil dipstick
-
Unbolt dipstick tube and pull up and out of crankcase
-
Remove crankshaft center bolt
-
Remove toothed belt sprocket
-
Remove tensioner and, where applicable, idler roller
-
Disconnect Engine Coolant Temperature (ECT) sensor harness connector
-
Remove coolant line to oil cooler (from oil pan)
-
Disconnect engine support from oil pan