90S Quattro (Canada) V6-2.8L (AAH) (1993)
-
Clean pulley and compressor contact surfaces.
-
Install belt pulley using VAG1719/2 adapter and plastic hammer.
-
Install new felt ring.
Installing Clutch Coil
-
Install clutch coil so that pin -A- engages in recess.
-
Using feeler gauge, check gap around entire circumference.
-
Must be 0.3 - 0.6 mm (0.012 - 0.024 in.)
NOTE: Gap must be within tolerance around entire circumference of compressor clutch.