90S Quattro (Canada) V6-2.8L (AAH) (1993)
Speedometer Head: Service and Repair
Nippon Seiki Instrument Cluster
Speedometer, removing and installing (Nippon Seiki)
-
Remove instrument cluster. See: Instrument Cluster/Service and Repair
-
Remove hex nuts -4- with washers and remove instrument panel light dimmer switch -3-.
-
Remove screws -1- and remove Mini-Check system display unit -2-.
-
Remove screws -1- and -4-.
-
Disconnect speedometer harness connector -2-.
CAUTION! The printed circuit is fragile. Use extreme care in removing, installing or handling, or damage to the circuit will result.
-
Carefully remove printed circuit -3-.
-
Remove speedometer mounting plate screw -1-.
-
Remove speedometer screws -3-.
-
Remove speedometer mounting plate -2-.