audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing mirror adjustment unit > < Removing and installing exterior mirror housing

A1

Removing and installing exterior mirror
   
Removing and installing exterior mirror
1 - Door
2 - Exterior mirror
q   Removing:
–  Remove door trim → Rep. gr.70.
–  Unplug electrical connector at door control unit and completely unclip wiring.
3 - Threaded pin
4 - Nut
q   6 Nm
5 - Grommet
q   When installing, make sure grommet is seated correctly in inner door panel.

   
Removing
–  Door trim removed → Rep. gr.70
–  Close door window completely.
–  Disconnect electrical wiring at door control unit and unclip completely from inner door panel.
–  Prise grommets -2- out of inner door panel in area of exterior mirror.
–  Remove nuts -1-.
–  Detach mounting for mirror adjustment unit and at the same time guide wiring harness out through door opening.
Installing
–  Install in reverse order.
l  Tightening torque → Item
  A57-10610

Removing and installing mirror adjustment unit > < Removing and installing exterior mirror housing