audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Actuating emergency release mechanism for glove compartment lid > < Removing and installing lower trim for steering column switch module
Exploded view of glove compartment
   
Exploded view of glove compartment
1 - Key-operated switch to deactivate front passenger side airbag -E224-
  WARNING
Heed the safety regulations for pyrotechnic components → Chapter.
q   Equipment-specific
q   Removing and installing → Chapter
2 - Glove compartment light -W6-
q   Equipment-specific
q   Removing and installing → Electrical system; Rep. gr.96
3 - Hinge pin
q   2x
q   For attachment of glove compartment lid
4 - Glove compartment
q   Removing and installing → Chapter
5 - Damping element
q   For glove compartment lid
q   With glove compartment light switch -E26-
q   Removing and installing → Chapter
6 - Hinge pin
7 - Bolt
q   8x
q   1.5 Nm
q   Tightening torque and sequence → Fig.
8 - Front right footwell light -K269-
q   Equipment-specific
q   Removing and installing → Electrical system; Rep. gr.96
9 - Glove compartment lid
q   Actuating emergency release mechanism for glove compartment lid → Chapter
q   Removing and installing → Chapter
10 - Glove compartment opening mechanism
q   Removing and installing → Chapter
q   Press into glove compartment lid until heard to engage

   
Glove compartment tightening torque and sequence
–  Tighten the bolts to 1.5 Nm in the sequence -1, 2, 3, 4-.
  A68-10458

Actuating emergency release mechanism for glove compartment lid > < Removing and installing lower trim for steering column switch module