A1
| Exploded view of backrest release mechanism |
| 1 - | Backrest frame |
| 2 - | Bowden cable |
| q | For backrest release mechanism |
| q | Cannot be removed without destroying it |
| q | Removing and installing → Chapter |
| 3 - | Tension spring |
| q | Engaged at operating lever and backrest frame |
| 4 - | Backrest release handle |
| q | Can be replaced with front seat in position |
| q | Removing and installing → Chapter |
| q | Must engage with retaining clip |
| 5 - | Trim |
| q | For backrest release mechanism |
| q | Can be replaced with front seat in position |
| q | Removing and installing → Chapter |
| q | Press on until heard to engage |
| 6 - | Retaining clip |
| q | For backrest release handle |
| q | Replace |
| 7 - | Operating lever |
| q | For backrest release handle |
| q | Riveted to backrest frame |
| 8 - | Support bracket |
| q | For Bowden cables |
| q | Bowden cables cannot be disengaged from support bracket |
| q | Clipped into backrest frame |
| 9 - | Clamping washer |
| q | Replace |
| 10 - | Corrugated washer |
| q | Replace |
| 11 - | Adapter |
| q | For backrest adjustment |
| 12 - | Support bracket |
| q | For Bowden cable |
| q | Cannot be removed without destroying it |
| q | Clipped into backrest frame |
