audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Dismantling and assembling selector mechanism > < Exploded view - selector mechanism

A1

Removing and installing selector mechanism
Removing and installing selector mechanism
   
Removing
–  Remove gear knob with gear lever boot → Chapter.
–  Remove centre console → General body repairs, interior; Rep. gr.68.
–  Remove heat shield in centre tunnel → Rep. gr.66.
  A68-10526
–  Remove air cleaner housing → Injection and glow plug system; Rep. gr.23.
  A23-10643
–  Remove securing clips -1, 2-.
–  Move gear selector cable and gate selector cable clear.
  Note
-Item 3- can be disregarded.
  A34-11045
–  Remove bolts and nut -arrows- for cable support bracket.
  A34-0621
–  Remove nuts -arrows- and detach selector mechanism from below.
Installing
l  Tightening torque → Chapter „Exploded view - selector mechanism“
Installation is carried out in reverse sequence; note the following:
–  Install gate selector cable and gear selector cable → Chapter.
–  Adjust selector mechanism → Chapter.
–  Install air cleaner housing → Injection and glow plug system; Rep. gr.23.
–  Install heat shield in centre tunnel → Rep. gr.66.
–  Install centre console → General body repairs, interior; Rep. gr.68.
–  Install gear knob with gear lever boot → Chapter.
  A34-0584

Dismantling and assembling selector mechanism > < Exploded view - selector mechanism