audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing radiator and water radiator for charge air cooler > < Removing and installing radiator outlet coolant temperature senderG83

A1

Removing and installing radiator cowl
Removing and installing radiator cowl
   
Removing
–  Remove noise insulation -1- → Rep. gr.66.
  A10-11306
–  Unplug electrical connector -arrow- at radiator fan thermal switch -F18-.
  A19-11171
  WARNING
Risk of injury as the radiator fans may start up automatically.
Unplug electrical connectors before performing work on radiator cowl.
–  Unplug electrical connector -1- for radiator fan at bottom of radiator cowl.
–  Press locking tabs on left and right sides of radiator cowl -arrow- and at the same time lift radiator cowl off radiator.
Installing
Installation is carried out in the reverse order; note the following:
–  Install noise insulation → Rep. gr.66.
  A19-11105

Removing and installing radiator and water radiator for charge air cooler > < Removing and installing radiator outlet coolant temperature senderG83