A1
| Charge air cooler - exploded view |
| 1 - | Intake manifold |
| q | Removing and installing → Rep. gr.24 |
| 2 - | Seal |
| q | Renew |
| 3 - | Throttle valve module -J338- |
| q | Removing and installing → Rep. gr.24 |
| 4 - | Securing clip |
| 5 - | Bolt |
| q | 7 Nm |
| 6 - | O-ring |
| q | Renew |
| 7 - | Air pipe |
| 8 - | Retaining clip |
| 9 - | Bolt |
| q | 7 Nm |
| 10 - | O-ring |
| q | Renew |
| 11 - | Charge pressure sender -G31- / intake air temperature sender 2 -G299- |
| q | Removing and installing → Chapter |
| 12 - | Bolt |
| q | 5 Nm |
| 13 - | Intake air temperature sender -G42- / intake manifold pressure sender -G71- |
| 14 - | Bolt |
| q | 5 Nm |
| 15 - | O-ring |
| q | Renew |
| 16 - | Gasket |
| q | Renew |
| 17 - | Sealing lip |
| 18 - | Coolant return hose |
| 19 - | Coolant supply hose |
| 20 - | Bolt |
| q | Tightening torque and sequence → Fig. |
| 21 - | Charge air cooler |
| q | Removing and installing → Chapter |
|
|
| Stage | Bolts | Tightening torque |
| 1. | -A … F- | Screw in bolts by hand until they make contact |
| 2. | -A … F- | 7 Nm |
