audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing sump > < Sump, oil pump - exploded view

A1

Removing and installing oil level and oil temperature senderG266
Removing and installing oil level and oil temperature sender -G266-
   
Removing
l  Engine oil drained → Booklet819.
–  Unplug electrical connector -3-.
–  Remove bolts -1- and detach oil level and oil temperature sender -G266--item 4-.
Installing
Installation is carried out in the reverse order; note the following:
l  Tightening torque → Chapter „ Sump, oil pump - exploded view“
  Note
Renew seal -2-.
–  Fill with engine oil and check oil level → Booklet819.
  A17-0294

Removing and installing sump > < Sump, oil pump - exploded view