A1
| Coolant pipes, coolant temperature senders, pump for exhaust gas recirculation cooler - exploded view |
| Vehicles with 4/2-way valve |
| 1 - | Bolt |
| q | 2.7 Nm |
| 2 - | Sleeve |
| q | Not supplied separately |
| 3 - | Grommet |
| q | Not supplied separately |
| 4 - | Bracket |
| q | For pump for exhaust gas recirculation cooler -V400- |
| 5 - | Bolt |
| q | 40 Nm |
| 6 - | Coolant pipe (front) |
| q | Removing and installing → Chapter |
| 7 - | O-ring |
| q | Renew |
| 8 - | Bolt |
| q | 9 Nm |
| 9 - | Coolant pipes (right-side) |
| q | Removing and installing → Chapter |
| 10 - | Bolt |
| q | 9 Nm |
| 11 - | Retaining clip |
| 12 - | Radiator outlet coolant temperature sender -G83- |
| q | Removing and installing → Chapter |
| 13 - | O-ring |
| q | Renew |
| 14 - | Bolt |
| q | 9 Nm |
| 15 - | Seal |
| q | Renew |
| 16 - | Connection |
| 17 - | O-ring |
| q | Renew |
| 18 - | Coolant temperature sender -G62- |
| q | Removing and installing → Chapter |
| 19 - | Threaded pin |
| q | 9 Nm |
| 20 - | Bolt |
| q | 9 Nm |
| 21 - | Retaining clip |
| 22 - | Bolt |
| q | 9 Nm |
| 23 - | Bolt |
| q | 9 Nm |
| 24 - | Coolant pipe (top front) |
| q | Removing and installing → Chapter |
| 25 - | Pump for exhaust gas recirculation cooler -V400- |
| q | Removing and installing → Chapter |
| Vehicles with thermostat |
| 1 - | Bolt |
| q | 2.7 Nm |
| 2 - | Sleeve |
| q | Not supplied separately |
| 3 - | Grommet |
| q | Not supplied separately |
| 4 - | Bracket |
| q | For pump for exhaust gas recirculation cooler -V400- |
| 5 - | Bolt |
| q | 40 Nm |
| 6 - | Coolant pipe (front) |
| q | Removing and installing → Chapter |
| 7 - | O-ring |
| q | Renew |
| 8 - | Bolt |
| q | 9 Nm |
| 9 - | Coolant pipes (right-side) |
| q | Removing and installing → Chapter |
| 10 - | Bolt |
| q | 9 Nm |
| 11 - | Retaining clip |
| 12 - | Radiator outlet coolant temperature sender -G83- |
| q | Removing and installing → Chapter |
| 13 - | O-ring |
| q | Renew |
| 14 - | Bolt |
| q | 9 Nm |
| 15 - | Seal |
| q | Renew |
| 16 - | Connection |
| 17 - | O-ring |
| q | Renew |
| 18 - | Coolant temperature sender -G62- |
| q | Removing and installing → Chapter |
| 19 - | Threaded pin |
| q | Tightening torque → Item |
| 20 - | Bolt |
| q | Tightening torque → Item |
| 21 - | Retaining clip |
| 22 - | Bolt |
| q | 40 Nm |
| 23 - | Pump for exhaust gas recirculation cooler -V400- |
| q | Removing and installing → Chapter |
