t
| Oil pressure tester -V.A.G 1342- |
l
| Engine oil temperature approx. 80 °C. |
–
| Connect oil pressure tester -V.A.G 1342- to threaded hole for oil pressure switch -F1-. |
–
| Screw a used oil pressure switch into threaded hole on oil pressure tester -V.A.G 1342- to seal hole. |
l
| Oil pressure at idling speed: at least 0.8 bar. |
l
| Oil pressure at 2000 rpm: at least 1.4 bar. |
Installation is carried out in the reverse order; note the following: |
–
| Install oil pressure switch -F1- → Chapter. |
|
|
|