audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Oil pump and sump - exploded view > < Checking valves

A1

Oil pump and sump
Oil pump and sump
Overview
t  → Chapter „Oil pump and sump - exploded view“
t  → Chapter „Removing and installing oil level and oil temperature sender -G266-“
t  → Chapter „Removing and installing sump“
t  → Chapter „Removing and installing oil pump“
  Note
t  If large quantities of metal shavings or abrasion are found when performing engine repairs, this may be an indication of damage to the crankshaft or conrod bearings. To prevent further damage, the following steps are required after completion of repair work: clean the oil galleries carefully and renew the oil spray jets, engine oil cooler and oil filter.
t  Refer to → Maintenance tables for engine oil capacity, oil specifications and viscosity grades.
t  Oil spray jet and pressure relief valve → Fig.
   

Oil pump and sump - exploded view > < Checking valves