A1
Air cleaner - exploded view |
1 - | Spring-type clip |
q | Remove and install using hose clip pliers -VAS 6340- |
2 - | Intake hose |
3 - | Air cleaner (top section) |
q | Clean out salt deposits, dirt and leaves, etc. |
4 - | Bolt |
q | 1.6 Nm |
5 - | Seal |
q | Renew if damaged |
6 - | Air filter element |
q | Use genuine air filter element → Electronic parts catalogue |
q | Change intervals → Maintenance tables |
q | Removing and installing → Chapter |
7 - | O-ring |
q | Renew if damaged |
8 - | Air cleaner (bottom section) |
q | Clean out salt deposits, dirt and leaves, etc. |
q | Removing and installing → Chapter „Removing and installing air cleaner housing“ |
9 - | Bolt |
q | 9 Nm |
10 - | Bush |
11 - | Rubber bush |
12 - | Rubber bush |
13 - | Water drain hose |
q | Clean |
14 - | O-ring |
q | Renew if damaged |
q | Use lubricant when installing |
15 - | Air duct |
q | To lock carrier |
q | Clean out salt deposits, dirt and leaves, etc. |
q | 3 Nm |
16 - | Connection |
17 - | Vacuum hose |
q | Renew if damaged |
q | To cylinder head cover |
18 - | Non-return valve |