audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing Lambda probeG39 and Lambda probe heaterZ19 before catalytic converter > < Lambda probes

A1

Lambda probe - exploded view
   
Lambda probe - exploded view
1 - Lambda probe after catalytic converter -G130-
q   With Lambda probe 1 heater after catalytic converter -Z29-
q   Removing and installing → Chapter
q   55 Nm
2 - Lambda probe -G39-
q   With Lambda probe heater -Z19-
q   Removing and installing → Chapter
q   55 Nm
3 - Catalytic converter
4 - Bracket
q   For electrical connectors
5 - Nut
6 - Nut

  Note
t  Threads of new Lambda probes are already coated with assembly paste; the paste must not get into the slots on the probe body.
t  In the case of a used Lambda probe grease only the thread with high-temperature paste. The paste must not get into the slots on the Lambda probe body. High-temperature paste → Parts catalogue
t  When installing, the Lambda probe wire must always be reattached at the same locations to prevent it from coming into contact with the exhaust pipe.
   

Removing and installing Lambda probeG39 and Lambda probe heaterZ19 before catalytic converter > < Lambda probes