A1
Ignition system - exploded view |
1 - | Spark plug |
q | Remove and install with spark plug socket and extension -3122 B- |
q | Removing and installing → Booklet 819 |
q | Tightening torque → Booklet 819 |
2 - | Cable guide |
3 - | Ignition coil with output stage |
q | Ignition coil 1 with output stage -N70- |
q | Ignition coil 2 with output stage -N127- |
q | Ignition coil 3 with output stage -N291- |
q | Ignition coil 4 with output stage -N292- |
4 - | Bolt |
q | 9 Nm |
5 - | Hall sender -G40- |
q | Removing and installing → Chapter |
6 - | O-ring |
q | Renew if damaged |
7 - | Knock sensor 1 -G61- |
q | Removing and installing → Chapter |
8 - | Bolt |
q | 20 Nm |
q | Tightening torque influences the function of the knock sensor |
9 - | Engine speed sender -G28- |
q | Removing and installing → Chapter |
10 - | Bolt |
q | 4.5 Nm |
11 - | Sender wheel |
q | For engine speed sender -G28- |
q | Removing and installing → Rep. gr.13 |