audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing Hall senderG40 > < Removing and installing ignition coils with output stages

A1

Removing and installing knock sensor 1G61
Removing and installing knock sensor 1 -G61-
Removing
   
–  Unplug electrical connector -1- at knock sensor 1 -G61-.
  Note
Knock sensor 1 -G61- is located below intake manifold and knock sensor 1 -G61- must therefore be removed from below.
–  Remove knock sensor 1 -G61--2-.
Installing
–  Install in reverse order.
l  Tightening torque → Chapter „Ignition system - exploded view“
  A28-10006

Removing and installing Hall senderG40 > < Removing and installing ignition coils with output stages