Audi Workshop Service and Repair Manuals > A1 > Power unit | Direct petrol injection and ignition system (4-cyl. 1.4 ltr. 4-valve turbo with timing chain) | Mixture preparation system, electronic inj.,Gas | Components of injection system | Removing and installing intake air temperature senderG42 / intake manifold pressure senderG71

Removing and installing intake air temperature senderG42 / intake manifold pressure senderG71

Removing and installing intake air temperature sender -G42- / intake manifold pressure sender -G71-

Removing

–	Unplug electrical connector -1-.

–	Unscrew bolts -arrows- and detach intake air temperature sender -G42- / intake manifold pressure sender -G71-.

Installing

Installation is carried out in the reverse order; note the following:

l	Tightening torque → Chapter

Note

Fit new O-ring.

Audi Workshop Service and Repair Manuals