audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Accelerator mechanism > < Activated charcoal filter system - exploded view

A1

Removing and installing activated charcoal filter
Removing and installing activated charcoal filter
Removing
–  Observe safety precautions → Chapter.
–  Observe rules for cleanliness → Chapter.
–  Remove rear wheel (right-side) → Wheels and tyres; Rep. gr.44.
–  Remove rear right wheel housing liner → Rep. gr.66.
   
–  Press release tab and disconnect breather line -1- leading to gravity valve.
–  Press release tab and disconnect breather line -2- leading to activated charcoal filter solenoid valve 1 -N80-.
  A20-10838
–  Remove bolt -2-.
–  Lift retaining tab -arrow- using a screwdriver and detach activated charcoal filter -1- from below.
Installing
Installation is carried out in the reverse order; note the following:
l  Tightening torque → Chapter „Activated charcoal filter system - exploded view“
–  Connect breather lines, making sure they engage audibly.
–  Install rear wheel housing liner → Rep. gr.66.
–  Fit rear wheel → Wheels and tyres; Rep. gr.44.
  A20-10762

Accelerator mechanism > < Activated charcoal filter system - exploded view