audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Fuel filter > < Checking fuel gauge senderG

A1

Removing and installing fuel gauge senderG
Removing and installing fuel gauge sender -G-
   
Removing
–  Observe safety precautions → Chapter.
–  Observe rules for cleanliness → Chapter.
–  Remove fuel delivery unit → Chapter.
–  Pull fuel gauge sender -G- inwards slightly and then lift out -arrows-.
  N20-10175
–  If necessary, release retaining tabs -arrows- using a screwdriver.
  A20-10067
  Caution
Risk of damage.
First release retainer tabs on connector contact before detaching electrical connectors on fuel gauge sender -G-.
–  Release and unplug electrical connectors -1…3-.
  A20-10431
Installing
Installation is carried out in the reverse order; note the following:
–  Plug in electrical connectors -1 ... 3- and make sure they are securely engaged.
–  Insert fuel gauge sender -G- into guides on fuel delivery unit and press upwards until it clicks into place.
–  Install fuel delivery unit → Chapter.
–  Connect battery (observe notes on procedure for connecting the battery → Electrical system; Rep. gr.27).
  A20-10431

Fuel filter > < Checking fuel gauge senderG