A1
| Injectors with clamping piece - exploded view |
| 1 - | Injector |
| q | If they are to be re-installed, the injectors, high-pressure fuel pipes and clamping pieces must always be re-fitted in their original positions (i.e. on the same cylinder). |
| q | Removing and installing → Chapter |
| 2 - | Bolt for clamping piece |
| q | Renew |
| q | 8 Nm + 1/2 turn (180 °) further |
| 3 - | High-pressure connection |
| q | Counterhold at high-pressure connection when loosening high-pressure pipes |
| 4 - | Retaining clip for return lines |
| q | Renew |
| q | Grease retaining clip lightly before fitting |
| 5 - | Copper seal |
| q | Renew |
